Battery idle supported, and will be available in next release.
How to use Battery Idle:
1. Install Advanced Charging Control (ACC) Magisk module and install AccA (APK), then reboot.
link: https://forum.xda-developers.com/t/advanced-charging-controller-acc.3668427/
2. Open AccA and give Root access, and click Gear icon to configure.Set "Stop charging at",When your battery reaches the percentage you set, charging will stop.
Then set the "Charging switch" to "battery/charging_enabled" (MUST).
Finally, turn on the "Prioritize battery idle mod" switch.
3. Charge the battery to the value you set and then enjoy it!
Tips: The "Test Battery Idle Mode" button is only available when charging.
1. Install Advanced Charging Control (ACC) Magisk module and install AccA (APK), then reboot.
link: https://forum.xda-developers.com/t/advanced-charging-controller-acc.3668427/
2. Open AccA and give Root access, and click Gear icon to configure.Set "Stop charging at",When your battery reaches the percentage you set, charging will stop.
Then set the "Charging switch" to "battery/charging_enabled" (MUST).
Finally, turn on the "Prioritize battery idle mod" switch.
3. Charge the battery to the value you set and then enjoy it!
Tips: The "Test Battery Idle Mode" button is only available when charging.
Forwarded from 可愛いメイドちゃん〜 #kmou424
MarisaKernel-0.5.x-R-raphael-20210315-222558.zip
19.4 MB
好耶! 构建成功了 | MD5 Checksum :
4c4d5b6643a6fe55f6cb2aec1fdb5db8MarisaKernel-0.5.x-R-cepheus-20210315-231247.zip
19.4 MB
好耶! 构建成功了 | MD5 Checksum :
6ccdb4e0a7e04e5cf2360ce70bf3a849Changelog:
1. Battery idle support
2. Drop 81hz and 78hz framerate
3. Reduce max GPU freq to 750mHz
4. PM QoS patches
5. Better&Faster fod
6. Smoother framerate
7. Compiled by clang-13
1. Battery idle support
2. Drop 81hz and 78hz framerate
3. Reduce max GPU freq to 750mHz
4. PM QoS patches
5. Better&Faster fod
6. Smoother framerate
7. Compiled by clang-13
MarisaKernel-0.5.x-Hotfix-R-raphael-20210316-120715.zip
19.4 MB
好耶! 构建成功了 | MD5 Checksum :
64acead2d9faa7829eb3e7049bc8df2e
Marisa Kernel Official Channel [raphael/alioth]
MarisaKernel-0.5.x-Hotfix-R-raphael-20210316-120715.zip
Hotfix: Fixed the bug that cannot boot on Redmi K20 Pro Premium Edition.
Forwarded from 可愛いメイドちゃん〜 #kmou424
MarisaKernel-0.6.x-R-raphael-20210317-091719.zip
19.4 MB
好耶! 构建成功了 | MD5 Checksum :
5b906b6756b33ecc18244cd9abdaeaed
Marisa Kernel Official Channel [raphael/alioth]
MarisaKernel-0.6.x-R-raphael-20210317-091719.zip
0.6.x Changelog:
1. GPU&CPU idle优化
2. 增加了 Pixel 4 的schedutil(非默认)
3. 加入了devfreq boost驱动并对zygote hwcomposer进行boost，同时在内存压力过大时boost
4. 内核日志从/sys/fs/pstore转为常规的/proc/last_kmsg
5. 加入了simple MSM thermal解决方案
6. 恢复完整CPU频率表，降低CPU功耗，调整EAS电源能级和能源模型(ctmd MIUI不适合高频方案)
7. 禁用了yc9559调度(perf-opt和uperf，在这给yc大佬道个歉，这真没办法)，尽量减少模块对内核的影响
8.禁止用户空间调整调速器参数，尽量减少模块对内核的影响
9.关闭了用不到的boost防止异常发热和升频
10.修复了一些意外重启的bug
Tips: 现在的发热和功耗应当会减少
1. GPU&CPU idle optimization
2. Added schedutil for Pixel 4 (not default)
3. Added the devfreq boost driver and boosted the zygote&hwcomposer, and boosted when the memory pressure is too high
4. Kernel log changed from /sys/fs/pstore to regular/proc/last_kmsg
5. Added the simple MSM thermal solution
6. The full CPU frequency table is back,and reduce the CPU power consumption, adjust the EAS power level & energy model(Fuck MIUI, not compatible with high frequency only)
7. Blocked sched module by yc9559 (include perf-opt and uperf, Apologize to yc9559 here)
8. Blocked writing to the userspace node of the CPU scheduler
9. Disabled not needed boost to reduce abnormal fever and abnormal frequency increase
10. Some unexpected reboot bug fixed
Tips: The current heat and power consumption should be less
1. GPU&CPU idle优化
2. 增加了 Pixel 4 的schedutil(非默认)
3. 加入了devfreq boost驱动并对zygote hwcomposer进行boost，同时在内存压力过大时boost
4. 内核日志从/sys/fs/pstore转为常规的/proc/last_kmsg
5. 加入了simple MSM thermal解决方案
6. 恢复完整CPU频率表，降低CPU功耗，调整EAS电源能级和能源模型(ctmd MIUI不适合高频方案)
7. 禁用了yc9559调度(perf-opt和uperf，在这给yc大佬道个歉，这真没办法)，尽量减少模块对内核的影响
8.禁止用户空间调整调速器参数，尽量减少模块对内核的影响
9.关闭了用不到的boost防止异常发热和升频
10.修复了一些意外重启的bug
Tips: 现在的发热和功耗应当会减少
1. GPU&CPU idle optimization
2. Added schedutil for Pixel 4 (not default)
3. Added the devfreq boost driver and boosted the zygote&hwcomposer, and boosted when the memory pressure is too high
4. Kernel log changed from /sys/fs/pstore to regular/proc/last_kmsg
5. Added the simple MSM thermal solution
6. The full CPU frequency table is back,and reduce the CPU power consumption, adjust the EAS power level & energy model(Fuck MIUI, not compatible with high frequency only)
7. Blocked sched module by yc9559 (include perf-opt and uperf, Apologize to yc9559 here)
8. Blocked writing to the userspace node of the CPU scheduler
9. Disabled not needed boost to reduce abnormal fever and abnormal frequency increase
10. Some unexpected reboot bug fixed
Tips: The current heat and power consumption should be less
Forwarded from 可愛いメイドちゃん〜 #kmou424
MarisaKernel-0.6.x-R-cepheus-20210317-110053.zip
19.5 MB
好耶! 构建成功了 | MD5 Checksum :
49c435bd9232f0c64fae188d7ee56d5fDeveloping the kernel is no easy task, especially when Xiaomi has not released the code for the kernel. Marisa Kernel still has many bugs that have not been fixed. You can donate to us to add a little motivation to our work!
Our Patreon: https://www.patreon.com/laulan56
Our Patreon: https://www.patreon.com/laulan56
Patreon
Laulan56 | creating Marisa Kernel | Patreon
Become a patron of Laulan56 today: Get access to exclusive content and experiences on the world’s largest membership platform for artists and creators.
MarisaKernelChargingFixer(Magisk).zip
5.1 KB
If you faced charging problem,plz flash this magisk module.
Forwarded from 可愛いメイドちゃん〜 #kmou424
MarisaKernel-0.6.8-R-raphael-20210425-194255.zip
19.1 MB
好耶! 构建成功了 | MD5 Checksum :
70322732a38cb70413be369f3b572453Forwarded from 可愛いメイドちゃん〜 #kmou424
MarisaKernel-0.6.8-R-cepheus-20210425-201644.zip
19.1 MB
好耶! 构建成功了 | MD5 Checksum :
89c4191ada6430b67816c95310897ca9Forwarded from kmou424 #ロキシー
0.6.8 Changelog:
1. Some fixes about usb
2. Re-apply high frequency tables
3. Drop Pixel schedutils
4. Add KCAL color control
5. Blocked s2idle (better cpu idle)
6. Remove msm-thermal-simple
7. Add Genshin Impact optimization which is written by sultan
8. Fix lz4 decompression speed (Backport from linux 5.x)
9. Other performance optimizations
1. Some fixes about usb
2. Re-apply high frequency tables
3. Drop Pixel schedutils
4. Add KCAL color control
5. Blocked s2idle (better cpu idle)
6. Remove msm-thermal-simple
7. Add Genshin Impact optimization which is written by sultan
8. Fix lz4 decompression speed (Backport from linux 5.x)
9. Other performance optimizations
Touhou Project 18th has been released!Hurray!
Because I have finally finished my education, now I can finally have time to take over the development work of Marisa kernel again. I've found a way to avoid charging incompatibilities, and I'll continue to keep our character. Coming soon.