Telegram Web Link
What is the maximum permissible longitudinal pitch in staggered riveted compression joints?
Anonymous Quiz
13%
500 mm
20%
400 mm
59%
300 mm
9%
100 mm
Indirect measurements involving two conversions are called ________ measurement.
Anonymous Quiz
10%
Tertiary
28%
Absolute
57%
Secondary
5%
Primary
What is the depth of immersion in water of wooden block ( density 650 kg/m3) of 2.5 m breadth, 1.5 m height and 6m long?
Anonymous Quiz
19%
0.557 m
53%
0.975 m
25%
0.256 m
3%
0.776 m
The abrasive cast iron sphere balls used in los Angeles abrasion test has a weight ( individual ) of
Anonymous Quiz
8%
150-200 grams
23%
229-274 grams
49%
390-445 grams
21%
490-550 grams
_____ is a type of concrete in which internal stresses are internally induced in a planned manner such that stresses resulting from the superimposed load gets counter acted to a desired degree.
Anonymous Quiz
8%
Post stressed concrete
8%
Curvature concrete
26%
Intra stressed concrete
58%
Pre stressed concrete
A plan is a ______ view while an elevation is ______ view.
Anonymous Quiz
18%
Top, Bottom
11%
Front , back
71%
Top, Front
0%
Left, Right
The original cost of equipment is rs100000 . It's salvage value at the end of its useful life of five years is rs40000. It's book value at the end of two years of its useful life as per straight line method of evaluation of depreciation will be
Anonymous Quiz
17%
68000
44%
76000
31%
58000
8%
12000
The value of property obtained after deducting the amount of yearly repairs from gross income is known as
Anonymous Quiz
24%
Rateable value
17%
Annuity
41%
Capitalised value
17%
All of the above
For 1cum of cement concrete prop with stone chips 1:2:4 , the required number of cement bags is
Anonymous Quiz
7%
4.54
29%
5.34
54%
6.34
10%
6.5
The specific speed of turbine is _____ where N is the speed of turbine , P is power generated , Q is rate of flow and H is head available.
Anonymous Quiz
17%
Ns = (N√Q )/(H^5/4)
29%
Ns = (N√Q)/(H^3/4)
52%
Ns = (N√P)/(H^5/4)
2%
Ns = (N√P)/(H^3/4)
1. A square cross section beam when kept with one diagonal in vertical position will have maximum shear stress at neutral axis.
2. The shear stress over a beam section of any shape for a given loading doesn't vary with shear force at a section.
Anonymous Quiz
21%
Only 1 is correct
26%
Only 2 is correct
41%
Both 1 and 2 are correct
13%
None of these
The pressure drop of a water in a pipe is measured by a manometer using a liquid of density 2000kg/m3 . The difference in the height of the liquid in the limbs is 10cm. Then the pressure drop is
Anonymous Quiz
23%
98.1 N/m2
33%
981 N/m2
41%
1692 N/m2
3%
1620 N/m2
The ratio of effective height to thickness of masonry walls shouldn't be more than
Anonymous Quiz
9%
50
35%
40
44%
30
12%
20
Consider the following related to autoclave bricks
1. Less water absorption compared to other bricks.
2. Noise reduction. 3. It is cheap compared to other types of bricks. 4. Requirement of bulk volume of mortar in joints is less compared to other bricks.
Anonymous Quiz
30%
1,2 and 4 are correct
27%
Only 1 and 3 are correct
35%
2, 3 and 4 are correct
8%
Only 2 and 4 are correct
Which of the following is not a fully non destructive testing of concrete
Anonymous Quiz
26%
Core
26%
Rebound hammer
22%
Profometer for rebar
25%
Ultra sonic pulse velocity
The grade bitumen used for airport runway is
Anonymous Quiz
31%
30/40
15%
60/70
49%
80/100
5%
100/120
In paints, lithopone and titanium oxide is used as
Anonymous Quiz
11%
A solidifier
23%
A driver
28%
A vehicle
38%
A water proofing base
In case of vertical parabolic curves, the rate of change of gradient is
Anonymous Quiz
22%
Always negative
42%
Always positive
14%
Zero
22%
Constant
What is the true strain if a square section of 5mm x 5mm is pulled by a force of 100kN (E= 2.1*10^5 N/mm2).
Anonymous Quiz
16%
0.0188
57%
0.0198
24%
0.0210
3%
0.0251
2024/07/01 02:56:59
Back to Top
HTML Embed Code: